Irontite Thoro—Flush comes in concentrated powder form. It is formulated to remove rust and scale from all types of metal surfaces bringing them back to like new condition. It does not harm thermostats or pumps. Thoro—Flush is the strongest coolant flush on the market and available from most major parts stores. It can clear out gelled coolant and open up plugged heater cores.
Rusty and scaled cooling systems impeed the flow of coolant and measurably increse engine heat build up. If your vehicle is overheating it could be that it needs to be cleaned with Thoro—Flush to allow your coolant to once again do the job it was intended to do.
Cleaning a fuel tank can be a tedious process. Manufacturers tend to recommend using soap and water and reaching in to wipe down the inside surfaces of the tank, etc. With Thoro—Flush it‚s much easier.
Both GM and Chrysler began using Dex—Cool extended life antifreeze in their vehicles beginning in the mid—90‚s. Dex—Cool, when mixed with non—Dex—Cool Antifreezes, will create a chemical reaction turning the cooling system coolant into a thick gel. Symptoms will be engine overheating and loss of heat from the vehicle‚s heater. Getting this Dex—Cool “mud&rdsuo; out of a vehicle is a difficult and time consuming job.
One pint of lrontite Thoro—Flush will clean, unplug and restore a coolant system to a like—new condition with a single simple flush. Thoro—Flush can be used with a flushing machine or simply as a manual flush. This allows you to recharge the system with proper coolant mixture, which will stop the vehicle from overheating and restore the passenger heating system.
Using a good quality flush like Thoro-Flush removes the crusty scale and rust that impedes the flow of your coolant when used in your cooling system. It also removes the foreign materials that can accumulate in your fuel tank when used to clean the fuel tank.