The Professionals Choice

Sponsors

Irontite Additives

Valve Stop Rod - Spindle Lock Tool


$15.25


The Valve Stop Rod is used to set the Valve Stop inside the chuck so that you can quickly set valve and valve into the chuck at the same depth.  The Valve Stop Rod is also used as your Grinder Spindle Lock Tool.  

To Lock the Grinder Spindle so you can change your grinding stones you first must move the Grinder Slide Lever to the verticle position which will expose the Spindle Lock hold just behind the Valve Grinding Stone.  You can then insert this Valve Stop Rod into the spindle lock hole and slowly turn the grinding stone with your hands while applying inward pressure on the Valve Stop Rod until you feel it go in further and lock the grinding stone from turning.  You are now ready to loosen the arbor nut to replace your grinding stone.

  • Model: 012-1205-00
  • Shipping Weight: 0.1lbs

Be the first to write a review.  Write a Review.



Sponsors

Van Norman Flywheel Grinders

Have you seen ...

Irontite Additives