Sleeve Drive In Tool for Navistar 7.3

This Sleeve Drive In Tool is designed for use with Navistar/International 7.3L Power Stroke, 466E, and 530E engines during injector sleeve service. It is a component of The complete 7.3L Power Stroke, 466E & 530E Series Kit with Toolbox (451-6773-00) and is used with a hammer to drive new injector sleeves into the engine casting after cleaning and sealant application.

The Sleeve Drive In Tool is an essential component for the proper installation of replacement injector sleeves in Navistar/International 7.3L Power Stroke, 466E, and 530E engines. This tool is included within The complete 7.3L Power Stroke, 466E & 530E Series Kit with Toolbox (451-6773-00), a comprehensive set for injector sleeve removal and installation.

During the sleeve installation process, after the injector sleeve bore area has been thoroughly cleaned and the appropriate sealant has been applied to the sleeve and casting (sealant not included), this Sleeve Drive In Tool is used in conjunction with a hammer. The tool is placed on top of the new injector sleeve, and gentle, controlled hammer strikes are applied to drive the sleeve down into the injector bore until it is fully seated at the bottom of the casting. The design of this drive-in tool ensures that even force is applied to the sleeve, facilitating proper installation and preventing potential damage.