Flywheel Grinder Accessory replacement components

81 results

Did you lose a part from your flywheel grinder accessory kit? Fear not, you can get an exact replacement from us.

Filter

filter_list

Sort & Filter

1.88" Centering Cone Bolt
SKU: 794-8010-64
1.88 inch Centering Cone Bolt Assembly
$22.54
Piece
1/4"-20 HEX JAM NUT
SKU: 804-8013-29
$0.98
Piece
5.00" Flange Adapter
SKU: 794-8010-94
$162.38
Piece
Dial Indicator Bar Assembly
SKU: 794-8013-24
Indicator Bar Assembly for Van Norman Flywheel Grinders. Used for precise measurements, offering a long precision
$485.08
Piece
SHCS .375-16X3.25 M ST BK
SKU: 794-8055-99
Socket Head Cap Screw .375-16x3.25”
$6.28
Piece
5.00" Centering Cone
SKU: 794-8010-86
$207.51
Piece
1.0" Standard Measure for Step Comparator Kit
SKU: 794-8692-69
1 inch standard measure block
$114.79
Piece
Grinding Wheel Spacer Assembly
SKU: 794-8628-21
$272.76
Piece
2.50" Centering Cone
SKU: 794-8010-76
$150.28
Piece
3.50" Centering Cone
SKU: 794-8010-80
$147.28
Piece
3.00" Flange Adapter
SKU: 794-8010-90
$149.08
Piece
1.0" Dial Indicator Point
SKU: 794-8013-33
Replacement 1 inch Dial Indicator Point
$32.42
Piece
4.00" Centering Cone
SKU: 794-8010-82
$160.18
Piece
4.450" Centering Cone
SKU: 794-8010-84
$175.69
Piece
2.0" Standard Measure for Step Comparator Kit
SKU: 794-8692-82
$121.40
Piece
HD Flywheel Adapter 3.255 (82.7 mm)
SKU: 794-8657-42
$178.17
Piece
2.5" Dial Indicator Extension
SKU: 794-8017-04
2.5” (63.5mm) Dial Indicator Extension for flywheel grinders. Enhances precision for measuring and adjusting, including checking head tilt on recessed or stepped flywheels.
$41.86
Piece
3.00" Centering Cone
SKU: 794-8010-78
3.00” Flywheel Grinder Centering Cone.
$147.28
Piece
1.375" Centering Cone (VW)
SKU: 794-8010-70
VW Centering Cone 1.375
$111.84
Piece
2.2690" Centering Cone
SKU: 794-8017-93
$150.28
Piece
ADAPTER FLANGE VW
SKU: 794-8010-95
VW Flange Adapter for Kwik-Way/Van Norman Flywheel Grinders This precision-ground plate provides a true surface for mounting specific flywheels and rotors, ensuring accurate alignment and maximum support.
$110.11
Piece
HD Flywheel Adapter 2.435" (61.8 mm)
SKU: 794-8657-38
$208.38
Piece
1-1/4" - 12 Nut for HD Truck Rotor Kit
SKU: 794-7803-03
Replacement Hold Down Nut
$9.15
Piece
1" Grinding Wheel Spacer
SKU: 794-8011-89
1 inch spacer for your Van Norman Flywheel Grinder Stone or CBN Wheel.
$143.46
Piece
HD Flywheel Adapter 2.04" (51.8mm)
SKU: 794-8657-37
$196.61
Piece
5.875" Flange Adapter
SKU: 794-8010-97
$191.74
Piece
4.00" Flange Adapter
SKU: 794-8010-92
$149.08
Piece
3.38" Centering Cone Bolt
SKU: 794-8010-66
$38.70
Piece
2.375" Centering Cone Bolt
SKU: 794-8010-65
$38.70
Piece
Grinding Wheel Mount Spacer (1.50")
SKU: 794-8124-71
$169.40
Piece
HD Flywheel Adapter 2.830" (71.9mm)
SKU: 794-8657-40
$176.09
Piece
Wheel Dresser Diamond
SKU: 794-8644-84
⅕ Carrot Wheel Dresser Diamond
$146.67
Piece
2" Grinding Wheel Spacer
SKU: 794-8011-90
$166.53
Piece
BAR INDICATOR
SKU: 794-8013-25
$157.57
Piece
Dial Indicator Magnetic Base with Flexible Arm
SKU: 794-8627-82
Easily position your dial indicator for precise measurements on Van Norman flywheel grinders with this optional magnetic base. Likely includes a flexible arm for versatile use.
$213.04
Piece
HD Flywheel Adapter 3.149" (79.9mm)
SKU: 794-8657-41
$178.17
Piece
4.25" Long Centering Cone Bolt
SKU: 794-8677-99
$41.30
Piece
1.38" Centering Cone (VW Rabbit)
SKU: 794-8010-69
1.38 inch Flywheel Centering Cone (VW Rabbit)
$80.42
Piece
Lower Grinding Wheel Flange
SKU: 794-8011-88
$81.16
Piece
ARBOR/PIN ASSEMBLY (1-7/8")
SKU: 794-8628-23
Center Shaft of the Heavy Duty Rotor Kit
$257.66
Piece
Dial Indicator Bar
SKU: 794-8013-20
$91.25
Piece
Radius Cutter Boring Bar 1.5" (38.1 mm) Dia.
SKU: 794-8084-05
$158.44
Piece
5/16" T-Handle Allen Wrench (3.5")
SKU: 794-8017-32
$35.56
Piece
3/4" Indicator Bar Set Spacer (2.50")
SKU: 794-8013-21
$62.91
Piece
1-7/8" Arbor Nut Wrench
SKU: 804-7803-35
1-⅞ inch Arbor Nut Wrench
$121.07
Piece
Radius Cutter Carbide Boring Tool Bit
SKU: 794-8084-06
$34.45
Piece
Table Lube Gauge Assembly (Dipstick)
SKU: 794-8013-73
Van Norman Flywheel Grinder Table Lube Dipstick Assembly
$85.57
Piece
Mounting Adapter for Head Tilt and Dial Indicator Kits
SKU: 794-8013-17
$63.31
Piece
0-1" Dial Indicator
SKU: 001-0023-75
Dial Indicator designed for accurate measurement and alignment tasks.
$50.93
Piece
MOUNTING WASHER (ROTOR KIT)
SKU: 794-8628-27
Large Mounting Washer
$59.02
Piece
3/8"-16 Socket Head Cap Screw (4-1/4")
SKU: 794-8692-39
$6.42
Piece
2.00" Centering Cone
SKU: 794-8010-74
$108.90
Piece
SLIDE HAMMER Dowel Pin
SKU: 794-8688-44
SLIDE HAMMER for Van Norman Dowel Pin Puller Kit (#794-8684-78). Generates the impact force needed to effectively pull dowel pins using the kit’s collets and slide rod.
$62.02
Piece
3.50" Centering Cone Bolt
SKU: 794-8010-67
$38.70
Piece
3" Arbor Spacer (1-7/8"I.D.)
SKU: 804-7803-01
$91.86
Piece
Bar Indicator Holder
SKU: 794-8692-68
$168.46
Piece
EZ Lock Insertion/Extraction Tool
SKU: 794-8637-45
$34.94
Piece
Rinse Hose Nozzle - FG
SKU: 000-3500-60
Replacement spray nozzle
$13.61
Piece
0.5" Dial indicator Foot Assembly
SKU: 794-8020-52
OEM ½ inch Replacement Dial Indicator Foot Assembly
$13.64
Piece
0.5" Dial Indicator Bar Foot
SKU: 794-8013-30
Replacement ½” Dia. Leveling Foot from the Dial Indicator / Indicator Bar Set.
$11.80
Piece

1.88" Centering Cone Bolt

1/4"-20 HEX JAM NUT

5.00" Flange Adapter

Dial Indicator Bar Assembly

SHCS .375-16X3.25 M ST BK

5.00" Centering Cone

1.0" Standard Measure for Step Comparator Kit

Grinding Wheel Spacer Assembly

2.50" Centering Cone

3.50" Centering Cone

3.00" Flange Adapter

1.0" Dial Indicator Point

4.00" Centering Cone

4.450" Centering Cone

2.0" Standard Measure for Step Comparator Kit

HD Flywheel Adapter 3.255 (82.7 mm)

2.5" Dial Indicator Extension

3.00" Centering Cone

1.375" Centering Cone (VW)

2.2690" Centering Cone

ADAPTER FLANGE VW

HD Flywheel Adapter 2.435" (61.8 mm)

1-1/4" - 12 Nut for HD Truck Rotor Kit

1" Grinding Wheel Spacer

HD Flywheel Adapter 2.04" (51.8mm)

5.875" Flange Adapter

4.00" Flange Adapter

3.38" Centering Cone Bolt

2.375" Centering Cone Bolt

Grinding Wheel Mount Spacer (1.50")

HD Flywheel Adapter 2.830" (71.9mm)

Wheel Dresser Diamond

2" Grinding Wheel Spacer

BAR INDICATOR

Dial Indicator Magnetic Base with Flexible Arm

HD Flywheel Adapter 3.149" (79.9mm)

4.25" Long Centering Cone Bolt

1.38" Centering Cone (VW Rabbit)

Lower Grinding Wheel Flange

ARBOR/PIN ASSEMBLY (1-7/8")

Dial Indicator Bar

Radius Cutter Boring Bar 1.5" (38.1 mm) Dia.

5/16" T-Handle Allen Wrench (3.5")

3/4" Indicator Bar Set Spacer (2.50")

1-7/8" Arbor Nut Wrench

Radius Cutter Carbide Boring Tool Bit

Table Lube Gauge Assembly (Dipstick)

Mounting Adapter for Head Tilt and Dial Indicator Kits

0-1" Dial Indicator

MOUNTING WASHER (ROTOR KIT)

3/8"-16 Socket Head Cap Screw (4-1/4")

2.00" Centering Cone

SLIDE HAMMER Dowel Pin

3.50" Centering Cone Bolt

3" Arbor Spacer (1-7/8"I.D.)

Bar Indicator Holder

EZ Lock Insertion/Extraction Tool

Rinse Hose Nozzle - FG

0.5" Dial indicator Foot Assembly

0.5" Dial Indicator Bar Foot