SVS II Deluxe Valve Refacer OEM replacement parts

Replacement rubber cover for the roll pin coming out of the chuck slide plate.

4mm Chuck Shaft Replacement Compression Spring

Flip Top, press in style Oiler.

OEM replacement clamp lever

Grinding Wheel Nut for Kwik-Way SVS II Deluxe Valve Refacer. Ensures the secure and safe attachment of the grinding wheel for stable and precise valve refacing operations.

Grinding Wheel Flange for Kwik-Way SVS II Deluxe Valve Refacer. Provides crucial support and ensures true, concentric mounting of the grinding wheel, minimizing run-out for precise results.

Chuck Feed Screw O-Ring

Set of six 17/32” Steel Chuck Balls for Kwik-Way 7/32” valve refacer chucks. Crucial for the Centerline System’s precision gripping and concentric valve refacing.

A shaft collar used to quickly and easily reposition and lock firmly into place the diamond grinding wheel dresser assembly.

Replacement V-Block Assembly

Swivel Plate Clamp End

Grinding Wheel Bushing for Kwik-Way SVS II Deluxe Valve Refacers. Essential for securing the grinding wheel to the spindle and preventing breakage during operation.

OEM replacement Wheel Guard Plate

Replacement compression spring for the diamond holder bracket on a Kwik-Way SVSIID Valve Refacer.

Set of six 9/16” Steel Chuck Balls for Kwik-Way 4mm valve refacer chucks. Crucial for the Centerline System’s precision gripping and concentric valve refacing.

Replacement Clamp Handle 5/16 inch

Upgraded replacement chuck speed controller to vary the rotation speed of your valve grinding chuck.

Keep your Kwik-Way SVS II Deluxe Valve Refacer running smoothly with the genuine 031-1118-03 Plug, a critical component for both the base and wheel dresser bracket assemblies.

Replacement Thrust Bearing for the V-Block Assembly on a Kwik-Way SVSII Deluxe Valve Refacer.

Newly designed Chuck Belt Pulley for the Kwik-Way Valve Refacer Chuck.

Valve Handwheel Measurements sticker

Chuck Feed Handwheel Assembly for Kwik-Way SVS II Deluxe Valve Refacer (SN 12651+). Controls precise feed during valve face grinding.

It’s a metal band that clamps around the shaft of the gearmotor.

Ensure the stability of your Van Norman FG5000 or FG10000 Flywheel Grinder’s Dial Indicator assembly with the genuine 000-1020-16, ¼”-28 zinc-plated Hex Jam Nut. Used to prevent loosening due to vibration.

Replacement Woodruff Key - Fits Van Norman FG5000 & Older SVSII D Refacers

Valve Refacer Replacement Feed Screw Nut.

Replacement Micro Switch Kit for Kwik-Way SVS II Deluxe & Standard valve refacers. This essential component is crucial for the chuck motor safety feature and is also used in the valve counter circuitry. Comes complete with mounting hardware.

Chuck Yoke Pivot Screw

Rocker Arm Attachment Assembly for Kwik-Way SVS II Deluxe Valve Refacer. Enables quick and precise refacing of shaft-mounted rocker arms. Standard accessory.

Replacement Speed Chart and Maintenance Label for the Chuck Cover

A pneumatic actuator designed to control the opening and closing of a Kwik-Way Valve Refacer Chuck.

Ensure comfortable and precise control of your Kwik-Way SVS II with the durable Oval Knob for the Traverse Handle.

Plastic motor cover for the Kwik-Way Valve Refacer

OEM replacement Valve Counter.

Control coolant flow on your Kwik-Way Valve Refacer or lube flow on your Van Norman FG Flywheel Grinder with this durable ¼” Male to Female Petcock Ball Valve (000-1536-68).

Kwik-Way Chuck Yoke Pivot Sleeve

Valve Refacer Coolant Pump

A Brass-tipped Set Screw

V-Block replacement compression spring

Spindle Bearing Slide Plate for the SVSII-D Valve Refacer. A cast iron, forged, and machined plate supporting the spindle bearings and enabling controlled linear movement of the spindle.

Chuck Yoke Tension Spring

Replacement Chuck Balls that Fits 11/16, 13/16 in. Chucks

Revolving Knob

Precision control at your fingertips. The Traverse Handle Bar for the Kwik-Way SVS II Deluxe Valve Refacer (Part No. 012-1019-10) enables precise grinding wheel movement for accurate valve work and dressing.

Air Valve Switch Assembly for Kwik-Way SVS II Deluxe Valve Refacer. This complete, pre-assembled, and leak-tested unit ensures quick installation and precise control of the air-operated chuck.