Van Norman Van Norman OEM Flywheel Grinder Parts for FG5000

Replacement Single Phase Grinding Motor for the Van Norman FG5000

Power Column Control Board

The bottom Motor Guard Flange for Van Norman Flywheel Grinders

Essential ¾” #18 Oil Fill Plug O-Ring for FG4000, FG5000, FG10000, and FG4000R Flywheel Grinders. Provides a crucial seal for the table’s oil fill plug, preventing lubricant leaks.

ORM replacement of the Flywheel Grinder Head Lock Handle Arm

The Van Norman Table Shaft Assembly includes the shaft bearings already press fitted in place making installation easier.

Electric Current Level Sensor for Van Norman FG5000/FG10000 Flywheel Grinders’ Auto-Grind system. Monitors grinding motor amperage to prevent overload during automated grinding.

Genuine Van Norman Flywheel Grinder Table Drive Gearbox (Part # 794-8651-07) for FG5000 & FG10000. Ensures consistent 16 RPM table rotation for precise grinding.

Flywheel Grinder Dresser Mounting Bracket Essential replacement bracket for securely mounting your grinding wheel dresser, ensuring accurate and efficient wheel truing.

Is your manual Van Norman flywheel grinder’s column adjustment feeling stiff or sloppy? Don’t let a worn handwheel compromise your precision! This genuine Van Norman 10” lead screw handwheel [794-8012-40] will restore smooth, accurate control so you can get back to perfect grinds.

Van Norman Flywheel Grinder Hood for units with Power Column and/or Auto-Grind feature.

Wheel Dresser Shaft for Van Norman FG4000, FG4000R, FG5000/FG10000 Flywheel Grinders. A key component of the optional wheel dresser assembly.

FG Leadscrew Nut for Van Norman FG5000/FG10000 Flywheel Grinders This new bronze version is essential for precise backlash adjustment, ensuring accurate column movement and peak grinding performance.

3 phase overload 1.0-2.9 Amp.

Old Style Leadscrew Nut for Van Norman Flywheel Grinders Essential for column movement and backlash adjustment on specific older models. Verify serial number compatibility before ordering.

Bearing Cap for Van Norman FG5000/FG10000 Flywheel Grinders OEM replacement bearing cap for the bottom of your Table Lube Reservoir, ensuring proper sealing and operation. Machined solid steel, weighs 9 lbs.

Dresser Adjustment Collar (knurled ring) for Van Norman FG4000, FG5000, FG10000 Flywheel Grinders. Controls dresser height for precise wheel dressing, restoring cutting ability and ensuring minimal heat generation.

Autogrind DC Gearmotor. Powers the automated downward feed of the grinding head in Van Norman FG5000 and FG10000 flywheel grinders equipped with AutoGrind™.

16 Amp 120V Motor Relay for Van Norman FG5000/FG10000 This contactor module controls the main grinding motor, crucial for reliable machine operation and protection.

Leadscrew Nut “L” Bracket Clamp for flywheel grinders. Two required. Crucial for leadscrew backlash adjustment and preventing side-to-side column movement, ensuring grinding precision and preventing damage.

Replacement Half Ring Set (Part No. 794-8012-63) for FG5000 Model column shaft mounting. Essential for repair or reassembly.

All metal screw in handle for Van Norman FG Model Flywheel Grinders.

Ensure accurate material removal readings on your manual Van Norman flywheel grinder with the Genuine Graduated Dial Pointer.

Drive Clutch for Van Norman FG5000/FG10000 Flywheel Grinders’ Auto-Grind system. Electrically activated clutch pulley.

Flywheel Grinder Autogrind Speed Controller (AC to DC) Restore precise, automated grinding and consistent finishes on your flywheel grinder with this replacement speed controller.

Switch Panel label for Power Column Only Machines

Keep your Van Norman flywheel grinder performing at its best with this genuine star dresser arm. Ensures effective wheel dressing for optimal grinding.

Maintain the stability and precision of your Van Norman FG5000 or FG10000 Flywheel Grinder with the genuine 794-8011-96 Column Lock Stud. Essential for secure column locking and accurate grinding results.