Search Results for “plug” in Diesel Injector Sleeve Tooling

Injector Sleeve Removal and Installation Tool Kit for the Caterpillar 3114, 3116, and 3126 2 valve engines.

Complete ISX15/QSX15 DOHC Casting Repair Tooling Kit. Includes cutters, taps, reamers, gauges, plugs, and consumables for rebuilding damaged injector seats.

Repair cracked injector seat areas in Cummins SOHC cylinder heads with the Irontite “Casting Repair” kit. This kit allows machinists to remove cracked material and replace it with new metal, using a cast ductile iron taper threaded “J” plug.

Complete Navistar 6.0 Series Kit with Toolbox for injector sleeve removal and installation. Includes installation tool, tap, guide bushing, removal tool, and TQ tool. Glow plug tooling sold separately.

Drill Bushing for Cummins ISX15/QSX15 DOHC Casting Series. Guides the drill for accurate drilling through the replacement plug during injector seat repair.

Injector Sleeve Removal Tool for NAVISTAR/INT’L 6.0 engines. Features a threaded puller shaft for extracting worn injector sleeves using a puller bridge and nut.

Guide Bushing for Navistar 6.0 Series engines. Ensures precise alignment for tapping injector sleeves and glow plugs during removal, a key part of specialized removal and installation tooling.

Installation Tool for Navistar 6.0 Engines. Used with a hammer to drive in new injector sleeves or glow plugs.

NAV 6.0 Injector Sleeve Tap for Navistar/International 6.0 Engines. Used to thread worn sleeves for removal.

The ISX / QSX Casting Seat Cutter (PN: 414-6157-28) is used for cleaning the seats at the bottom of the injector holes and for cutting a new injector seat in the rebuilt area of the casting. It is a component of the Cummins SOHC Injector Seat Casting Repair Kit.

Tap 1-3/16”-12 for Cummins M-11 (Stainless Steel Sleeves) & CAT 3114/3116/3126 (Copper Sleeves). Threads old sleeves for removal. Included in specific tooling kits.

G-Oversize HSS Tapered Tap. High-speed steel tap for installing “GO” series ductile iron plugs in GM/Detroit Diesel 71 & 92 engines and other casting repair applications.

The Counter Bore Pilot (PN: 416-6117-62) is a component of the Cummins SOHC Injector Seat Casting Repair Kit. It is used with the enlarging counter bore and the end facing counter bore when repairing a casting.

The Drill Bushing (PN: 414-6157-19) is a component of the Cummins SOHC Injector Seat Casting Repair Kit. It is used when drilling the replacement plug.

The Taper Length Drill (PN: 414-6157-26) is a component of the Cummins SOHC Injector Seat Casting Repair Kit. It is used for drilling through the replacement plug.

END Facing Counter Bore Cutter