Search Results for “M-11 Kit” in Irontite Replacement tools for Irontite Diesel Injector installation and removal kits

416-6156-43 Nose Roll-In Tool for precise injector sleeve installation in Cummins ISX15/QSX15 DOHC engines. Requires motor oil lubrication.

Professional M-11 sleeve nose roll-in tool (416-6152-45) for precise stainless steel injector sleeve installation in Cummins M-11 cylinder heads.

Roll-In Tool for Cummins ISX15/QSX15 DOHC Engines. This specialized tool rolls in the upper end of new stainless steel injector sleeves for precise seating. Made in USA.

Tip Expander Driver for CAT 3114/3116/3126 (2-Valve) Copper Sleeved Engines. Used with a hammer and tip expander to install injector sleeves.

Drill Bushing for Cummins ISX15/QSX15 DOHC Casting Series. Guides the drill for accurate drilling through the replacement plug during injector seat repair.

Precision machined and ground to the highest standards in order to be most accurate for OEM (Original Equipment Specifications).

Roll-in Tool for installing copper injector sleeves in CATERPILLAR 3114, 3116, and 3126 (2-Valve) engines. Expands the sleeve end for a proper fit and seal. Requires light oil lubrication.

Gauge Handle used in various Irontite tooling kits for Cummins and GMC diesel engines to hold gauges during injector sleeve seat and tip protrusion cutting procedures.

Sleeve Removal Tool for NAVISTAR/INT’L 7.3L Power Stroke, 466E & 530E engines. Used with a tap and puller bridge to mechanically extract worn injector sleeves.

Guide Bushing for Navistar 6.0 Series engines. Ensures precise alignment for tapping injector sleeves and glow plugs during removal, a key part of specialized removal and installation tooling.

Injector Sleeve Roll-in Tool for the Cummins ISM, M-11 Stainless Sleeves

Injector Sleeve Drive-In Tool for Cummins ISX15/QSX15 DOHC Series Engines. Designed for precise installation and proper seating of new injector sleeves. Made in USA.

Easily remove injector sleeves in CATERPILLAR 3114/3116/3126 engines. Part of the complete puller assembly.

Our exclusive designed carbide Injector Sleeve Seat Cutter. Suitable for both Stainless steel and Copper injector cups.

Ensure smooth injector sleeve service for GMC 50/60 engines with the genuine Irontite Guide Bushing Assembly.

Sleeve Hammer Tool Assembly for Caterpillar 3114/3116/3126 (Copper Sleeves) & 3406E (Stainless Steel Sleeves). Used for injector sleeve installation.

Injector Sleeve Seat Cutter (Carbide) for Cummins ISX15/QSX15 DOHC engines. Used with a guide bushing and arbor to cut the injector tip protrusion to the correct height.

Installation Tool for Navistar 6.0 Engines. Used with a hammer to drive in new injector sleeves or glow plugs.

Sleeve Drive In Tool for Navistar 7.3L Power Stroke, 466E & 530E Engines. Used with a hammer to install injector sleeves.

Achieve a perfect, leak-free seal on GM/DD 50/60 copper sleeved injectors with the durable Irontite Carbide Seat Cutter.

Precision 5-fluted carbide casting seat cutter for Cummins 220, 250, 855, L-10, M-11 & ISM engines. Ensures accurate cleaning and leak prevention.

Extended Tap for Cummins ISX15/QSX15 DOHC & SOHC Series. Used to thread worn injector sleeves for removal.

Sleeve Roll-In Tool with Tension Spring for installing copper injector sleeves in Cummins 250, L-10, and M-11 engines. Expands the sleeve end for a proper seal. Use with quality motor oil.

Drive In Tool for CAT 3176 & 3196 Copper Injector Sleeves Ensures proper, damage-free installation of new copper sleeves. This essential tool is available individually, even though its original kit is discontinued.

Specialized Injector Sleeve Removal Tool for PACCAR MX-13 Series engines. Designed for safe and controlled extraction of old sleeves. Multi-component assembly ensures efficiency. Components Made in USA.

Seat Cutter Bushing for Cummins ISX15/QSX15 and Tap Guide Bushing for Cummins X12

Flaring Stud for installing copper injector sleeves in GM/Detroit Diesel 53, 71, 92, 50 & 60 Series engines. Flares the sleeve end for a secure fit.

Injector Sleeve Seat Cutter for Caterpillar 3114, 3116, and 3126 (2-valve) copper sleeved engines. Essential for ensuring proper injector seating by cleaning or cutting the seat in the sleeve.

Removal Tool Threaded Body for Cummins Copper Sleeves Essential component for extracting copper injector sleeves from Cummins 250, L-10, and M-11 engines. Requires a hydraulic press for final removal.

Tip Reamer Driver for GM/Detroit Diesel 50 & 60 Series Copper Sleeved Engines. Drives the reamer to clean the bottom of injector sleeves.

The ISX / QSX Casting Seat Cutter (PN: 414-6157-28) is used for cleaning the seats at the bottom of the injector holes and for cutting a new injector seat in the rebuilt area of the casting. It is a component of the Cummins SOHC Injector Seat Casting Repair Kit.

Tap 1-3/16”-12 for Cummins M-11 (Stainless Steel Sleeves) & CAT 3114/3116/3126 (Copper Sleeves). Threads old sleeves for removal. Included in specific tooling kits.

Flat Tip Protrusion Gauge for Cummins 220, 250, 400, 855, and VT1710 engines. Checks injector tip protrusion in the .060” to .070” range, ensuring precise engine rebuilds.

The Counter Bore Pilot (PN: 416-6117-62) is a component of the Cummins SOHC Injector Seat Casting Repair Kit. It is used with the enlarging counter bore and the end facing counter bore when repairing a casting.

This high-quality tap creates threads in old injector sleeves, ensuring easy and efficient removal without damaging the cylinder head casting.

Specialized Sleeve Drive-In Tool for Caterpillar 3126B (3-valve) Stainless Steel Sleeved engines. Ensures new injector sleeves are precisely driven and seated into the cylinder head casting.

The Casting Seat Cutter Gauge (PN: 414-6157-29) is used for ensuring the correct seat depth when cutting a new injector seat in the rebuilt area of the casting. It is a component of the Cummins SOHC Injector Seat Casting Repair Kit.

Casting Seat Cutter Protrusion Gauge Disc for Injector placement.

Removal Tool for Cummins ISX15/QSX15 DOHC & X15 SOHC Engines. Used for extracting old injector sleeves. Included in specific tooling kits.

The Drill Bushing (PN: 414-6157-19) is a component of the Cummins SOHC Injector Seat Casting Repair Kit. It is used when drilling the replacement plug.

Tap 1-1/16”-16 for CAT 3126B (3-Valve) Stainless Steel Sleeved Engines. Threads old sleeves for removal.

The Taper Length Drill (PN: 414-6157-26) is a component of the Cummins SOHC Injector Seat Casting Repair Kit. It is used for drilling through the replacement plug.

T-Handle Wrench used in Cummins ISX15/QSX15 and X12 Injector Sleeve Removal and Installation Kits.